|
|
|
The Quick Brake Flasher
Since most antique vehicles don't have a third brake light, the Quick Brake Flasher helps add extra awareness to you and your classic car when braking!
The Quick Brake Flasher helps prevent rear-end accidents. It is completely self contained and quickly attaches to your vehicles rear window. It doesn't require any wiring. While driving between shows
you can place it in your vehicle to add extra awareness, and then remove it
during the show. It senses when your are braking harder than an adjustable threshold with a built in acceleration switch, and rapidly flashes super bright LEDs to alert following drivers that you are braking quickly! When braking below this threshold it does nothing. Its threshold can be made as sensitive as you like!
- It installs quickly and easily to any vehicle with a rear windshield!
- It uses reliable high quality suction cups that are tested from -20 to 120 deg. F!
- There are no wires to connect!
- It has adjustable sensitivity!
- The super bright LEDs have a combined brightness of more than 40,000 mcd, and can be seen more than 1000 feet!
- Comes complete with installed CR2032 lithium batteries that last over one year and are replaceable!
- It's small enough so it doesn't block your view!
- It provides following drivers with a second level of awareness!
How it Works
See the solid red box above. It's not very good at getting your attention. So why are brake lights like this? The only time you really know someone is braking is because you see a transition of their lights from dim to bright. But as they're braking, the brake lights stay bright without any transitions. In fact if their lights were bright all the time, you wouldn't even know if they're braking or not. The part of the current brake light system that gets our attention isn't the brightness, it's the transition of the dim to bright!
Now look at the flashing red LEDs below. Don't they get your attention? The LEDs are transitioning on and off. This is what grabs your attention. For example, the LED on your office phone that flashes when you have new voice mail, its flashing gets your attention. Now what if the LED on your phone just stayed lit, no flashing, you wouldn't notice it much at all! Which is why it was designed to flash in the first place! Like the LED on your phone flashes to get your attention when there're new messages, so do the LEDs of the Quick Brake Flasher to grab the attention of following drivers when you brake hard.
Studies show that our eyes find dynamic flashing lights over static solid lights much more interesting and irresistible. The Quick Brake Flasher uses this concept to add more awareness when you are braking hard.
How and when it flashes
The Quick Brake Flasher only flashes when you're braking hard. It has a built in acceleration switch that triggers the LEDs to flash when you brake harder than .4 G. To get an idea of just how hard this is, a typical seat belt will lock up at about .7 G. So the Quick Brake Flasher flashes at about half this level of braking.
Sensitivity adjustment
When you receive the Quick Brake Flasher it comes adjusted to .4 G. However if you would like to make it more or less sensitive you can easily adjust it. To make it more sensitive, just bend the acceleration switch up a little, or to make it less sensitive bend the switch down a bit. With your order, you will receive complete instructions explaining how to change your Quick Brake Flasher's sensitivity.
Vehicles you can install it in
The Quick Brake Flasher can be installed in all types of classic cars and trucks or modern vehicles. It will install easily to any vehicle with a rear windshield.
Why Use the Quick Brake Flasher?
The Quick Brake Flasher creates a second level of awareness for following drivers. Imagine your driving along, and the vehicle in front of you slows down gradually. You would see their brake lights turn on, and as a result you slow down. Now imagine, instead of the vehicle just slowing down, they brake quickly. Again their brake lights turn on, but judging by their brake lights alone, you may think they are just slowing down, especially at night when its harder to judge distance by surrounding objects. What if this person had a Quick Brake Flasher and they were braking hard? Instead of just seeing brake lights, you would see the bright LEDs of the Quick Brake Flasher rapidly flashing. Wouldn’t this alert you better, making you more aware of the vehicle in front of you? Emergency vehicles flash lights all the time to get driver’s attention. So why not use the Quick Brake Flasher to grab the attention of following drivers, and reduce your risk of being hit in a rear-end collision?
What others have said...
- Wow! The LEDs are really bright! -Jeff H.
- I really like being able to remove it during shows! -Frank H.
- It really makes sense to alert others with the flashing LEDs! -Steve M.
- When I took it out of the package and tested it according to the instructions, I couldn't believe the brightness of the LEDs! -Jason G.
Order your Quick Brake Flasher for only $23.99!
Order more than one, and shipping on the second one is free!
What your order includes...
- A 100% operationally tested Quick Brake Flasher
- Complete operation and easy installation instructions
- Two installed lithium coin cell batteries
- Quick delivery within 3-7 days
- Emailed receipt and customer support
- 30 Day Risk Free Money Back Guarantee
Ordering Online and by Mail
Top Serve uses Paypal as its secure online credit card merchant. Paypal is very secure and easy to use. Simply follow the instructions after clicking on the shopping cart.
Or if you prefere, you can also mail your payment. Please make the check or M.O. made payable to: Top Serve
and mail to:
Top Serve |
Once received your order will be processed promptly.
Shipping
Shipping charge is $4.50 for U.S. and Canada. Your order will be shipped via U.S. mail and delivered within 3-7 days. After you order, you will receive an emailed receipt confirming your purchase.
International Orders
Shipping charge is $5.50. Your order will be shipped via US Airmail and delivered within 5-9 days. After you order, you will receive an emailed receipt confirming your purchase.
Click here to order
Money Back Guarantee
Your purchase is risk free! If you are not 100% satisfied with your order, just send it back to the return address on your package within 30 days for a full refund minus shipping.
Top Serve |
|
|
This document is copyright protected September 2000. The Quick Brake Flasher is patent pending. Top Serve's violators of copyright and patent laws will be prosecuted to the greatest extent of the law. Copyright material may not be used without the express written consent of Top Serve.